Learning Center Course Curriculum

 

The Learning Center Courses —Online (OL) and Instructor-Led (IL)—are listed here with the cost for each course shown as available for OL and/or IL registration. Click the View button for details on the course.

To register for a course, you can:

• Search for scheduled Instructor-Led courses from the Instructor-Led Course link

• Request specialized or create Your own Instructor-Led courses from the Custom Programs link

• Search for available Online courses from the Online Course link

We are continuously updated our online course offerings and adding new courses.If you don’t see a course you would like check back again or Contact Us let us know any ideas you have for new courses we could offer.

 
COURSES AVAILABLE Online Instructor-Led

Advansor CO2 Booster System Installation and Startup

This course explains how to properly install, startup, maintain, and troubleshoot the CO2 Booster refrigeration system. Control and operating strategies are explained as well as specific installation and startup concerns related to Transcritical CO2 Booster systems.

$299.00

Advansor CO2 Leak Detection - Tech Tip

Rusty Walker demonstrates how to properly use a CO2 leak detector.

Advansor CO2 Single Condensing Units

This course explains how to properly install, start up, maintain, and troubleshoot the Advansor CO2 Single Condensing Unit refrigeration system. Control and operating strategies are explained as well as specific installation and startup concerns related to Advansor CO2 Single Condensing Units.

$299.00

Advansor Compressor Change - Tech Tip

This tech tip covers the steps involved in changing a compressor on a CO2 booster system.

Advansor Condenser Fan Change - Tech Tip

This tech tip shows the steps involved in changing a condenser fan on a CO2 booster system.

Advansor Filter Drier Change - Tech Tip

This tech tip shows the steps required to change a filter drier on a CO2 booster system.

Advansor Oil Filter Change - Tech Tip

This tech tip show the steps involved in changing an oil filter on an CO2 booster system.

Advansor VFD Navigation - Tech Tip

In this tech tip, John Bittern, Hillphoenix R&D manager, demonstrates basic navigation of a Danfoss VFD controller.

Basic Electricity

This course explains basic principles of electricity and power distribution.

$685.55

Basic Refrigeration

This course covers the refrigeration process, the heat transfer properties, and basic components of the refrigeration cycle.

$99.00

Basic Refrigeration Systems

This course covers the refrigeration process, the heat transfer properties, and basic components of the refrigeration cycle. The course also introduces how these principles apply to commercial and supermarket refrigeration systems.

Case Installation, Start-Up, Troubleshooting and Maintenance

This course provides a working knowledge of the installation, start-up, maintenance, and troubleshooting procedures for Hillphoenix refrigerated cases.

$299.00

Case Product Knowledge

This course provides the participant with an overview of the entire range of refrigerated display cases manufactured and sold by Hillphoenix.

$249.00

Changing an End Panel on a Multi-deck Case

Watch this Learning Center Tech Tip as Rusty Walker shows you step-by-step instructions on how to change an end panel on a multi-deck case.

CO2 DX Cascade System Installation, Start-up, Maintenance and Troubleshooting

This course explains how to properly install, start-up, maintain, and troubleshoot medium temperature CO2 DX Cascade refrigeration systems. Control and operating strategies are explained, as well as specific installation and start-up concerns related to CO2 DX Cascade systems.

$249.00

Coolgenix Merchandising

Coolgenix® is exclusive technology developed by Hillphoenix® that cools products through conductive cooling. This course outlines the benefits of Coolgenix technology, the best methods to merchandise these cases to properly showcase your products, how to correctly utilize display ware within a Coolgenix case, and how to properly clean a Coolgenix display case.

Coolgenix TM

This course provides an in-depth understanding of the design, manufacture, and operation of the Hill PHOENIX Coolgenix™ line of refrigerated display cases.

$249.00

Display Case Applications, Accessories and Advanced Technologies

This course is intended to provide participants with a working knowledge of the design, manufacture and application of refrigerated display case products of Hillphoenix.

$299.00

Distributed Product Applications

This course provides an overview of the distributed systems products manufactured by the Hillphoenix Systems division.

$249.00

Driver Safety

Driver Safety

$0.00

Heat Stress Management

Heat Stress Management

Hillphoenix Product Knowledge

This course is designed to provide a working knowledge of the products produced by five of the company’s divisions and the major options and configurations that are available.

$59.00

Hot Foods Safety and Application Training

This Hillphoenix module in Hot Foods Safety Training Program is intended to provide participants with a food safety overview on hot foods programs. It includes guidelines as well as the standard operating procedures for handling hot foods and managing the equipment that maintains those products.

$249.00
$299.00

Introduction to Revit

This Revit Course is a basic overview of Revit and how Revit is used to harness BIM (Building Information Modeling). Materials covered in this course are at a basic level. An understanding of basic Revit principles, processes and how to use Revit to harness BIM. 

$100.00

LED Retrofit Training

The Hillphoenix Clearvoyant 2 LED Retrofit Program training will detail the steps required to competently execute an LED retrofit with a refrigerated display case manufactured by Hillphoenix and any other manufacturer.

$249.00

Low-Temperature CO2 Second Nature Secondary Systems Installation, Start-up, Troubleshooting and Maintenance

This course covers the Hillphoenix Second Nature Low Temperature CO2 secondary system installation, start-up, maintenance and troubleshooting.

$299.00

Medium-Temperature Second Nature Secondary Installation, Start-up, Troubleshooting and Maintenance

This Hillphoenix course explains the processes and steps required to properly install, startup, maintain and troubleshoot medium-temperature secondary refrigeration systems.

$299.00

Power Systems Basic Product Knowledge

This course provides an overview of the products manufactured by Hillphoenix Power Systems Division.

$249.00

Refrigeration Legends and Design Considerations

This course explains the information contained on a legend, the purpose of a legend, and how legends are used and applied for store design specifications.

$249.00

Revit Training

*A PC is REQUIRED for this course (Revit 2013-2017 Full or 30-Day Trial Installed)

This Revit course is hands-on training demonstrating how to work with Revit and use it in a design platform. Participants will work on various skill sets and learn how to harness Revit to create smart documentation with schedules, interference checking, sheets creation and more. 

$300.00

Second Nature Georg Fischer Piping for Medium-Temperature Secondary Systems

This course details the steps required to properly configure and install George Fischer engineered plastic piping systems for use in Hillphoenix medium temperature secondary refrigeration applications.

$249.00

Specialty Case Product Knowledge

This course provides an overview of the entire range of specialty display cases produced by Hillphoenix.

$249.00

SweatMiser Technical Training

Technical training for anyone working with a SweatMiser system.

Systems CO2 Product Knowledge

This course covers the CO2 secondary products manufactured by the Hillphoenix Systems division and the applications for those products.

$299.00

Systems DX Installation, Start-Up, Troubleshooting and Maintenance

This courses explains how to properly install, start-up, maintain, and troubleshoot a Direct Expansion (DX) system for supermarkets and other applications.

$299.00

Systems Product Knowledge

This course covers the refrigeration process, the heat transfer properties, and the basic components of the refrigeration cycle.

$249.00

Systems Secondary Compact Chiller (CCM) Installation, Start-up, Troubleshooting and Maintenance

This course covers the Hillphoenix Second Nature Medium-Temperature Compact Chiller Module (SNCC) secondary systems installation, start-up, maintenance and troubleshooting.

$249.00

Systems Secondary Product Knowledge

This course covers the secondary products manufactured by the Systems division and the applications for those products.

$299.00

Variable Frequency Drives

This course explains how variable speed controllers work and why they are used for the operation of pumps, compressors and condenser fans. Pump sequencing and the equipment required to accomplish it is explained along with how the controllers are set up from the factory and calibrated in the field. An overview of the parameters and troubleshooting drives is also included.

$299.00

Walk-Ins Installation, Troubleshooting and Maintenance

This is an online-only course in Walk-Ins installation, maintenance, and troubleshooting. It provides a detailed step-by-step examination of the procedures involved in the installation, maintenance, and troubleshooting of walk-in units manufactured by the Hillphoenix Walk-Ins Division.

$249.00

Walk-Ins Product Knowledge, Installation and Maintenance

This course covers the products and services offered by the Hillphoenix Walk-Ins Division. The course focuses on the manufacturing processes and technologies, including the materials used in manufacturing, developed for the production of the highest quality walk-in coolers and freezers in the industry.

$249.00
 
having trouble? get help
Thank you for your feedback.